Member card enrollment

Member card enrollment

Any clubs using an Essl X990, Essl I clock, Suprema A2/L2/W2 can use RFID/Mifare card for enrolling the members to access the club. Note: ESSL X990, IClock can support any one of these cards either RFID or Mifare. However, the compatibility can be checked through the Essl vendor.



  • For member card enrollment. Login to the Fitnessforce Software & open the member’s profile. You can click on the Access control tab & click on the pencil icon against the card number. Update the card number that you want to assign to your member.



  • Now open the access control application & click on the Manual Sync button. 



  • After clicking on the Manual Sync tab it will start the synchronization process. And the card details will be sent to the connected access control device.



  • Once the sync is completed you can tap the assigned card on the access control device & it will show the member details on the access control device.


FAQ’s


1. When I tap the card on the bio-metric machine it does not respond?

Ans. The bio-metric device supports different card types (RFID/Mifare). You can check with your Access control device vendor about the bio-metric device configuration & the supported card type.


2. Where do I buy RFID and Mifare cards?

Ans. You can get these cards from any vendor who sells Suprema or ESSL devices.


    • Related Articles

    • Member enrollment

      This feature enables the club to enroll the member’s anyone finger with the Fitnessforce Access control application. And you can enroll your members through ESSL X990, I Clock, ZK 7500 and Suprema Biomini Plus 2. Once the access control application ...

    • Staff card enrollment

      Any clubs using an Essl X990, Essl I clock, Suprema A2/L2/W2 can use RFID/Mifare card for enrolling the staff to access the club. Note: ESSL X990, IClock can support any one of these cards either RFID or Mifare. However, the compatibility can be ...

    • Staff Enrollment

      This feature enables the club to enroll the staff finger with the Fitnessforce access control application. And you can enroll your staff members through ESSL X990, I Clock, ZK 7500, and Suprema Biomini Plus 2. Once the access control application is ...

    • Member creation

      This document will enable you to understand how to create members along with the membership bill in the software. The client can opt for short term or long term memberships like 3 months, 6 months, or 12 months.  An invoice can be generated through ...

    • Clear member finger template

      This feature enables you to clear the registered finger of your member. Once it’s cleared you can re-enroll the same or different finger of your member for further capturing of the attendance and accessing the club.  To clear the existing finger ...